Paper Nature Revision – Aidan Sensiba

For my revision, I fixed the wiring so that the inputs were more reliable and responsive. I also remade the platonic solids with sturdier construction paper, and removed the unstable supports under the platform so that it lays flat on the floor.  In addition, I reduced the file size of the videos that played with…

Paper Nature Revision – Minh-Chau Doan

For this project, I identified ways I could improve it: Making the videos connect better because they seem choppy to me, Adding audios and/or animations like an overlay of snow falling, Adding more videos to each season, Adding the season of fall, Better incorporation of ground, Better randomization (less choppy transitions and less repeats). I…

Paper Nature Project (Revised)

My paper nature project consists of a wintery scene featuring a birch tree holding a tree house. Both of these objects are painted with conductive paint and attached to the MaKey MaKey. Each object is connected to a different port on the MaKey MaKey, which has been reprogrammed to produce letters instead of the original…

Noah Hillman – Paper Nature Revision

From suggestions in class and online, I updated my project in a few ways. First, to clean up the overall look of the project I moved the Makey Makey inside the house which just took a bit of re-wiring. I also wanted to add a more variables and autonomy. For this, I added random weather…

Paper Nature Revised – Kailun Liu

As a reflection of the suggestions, I made a new board, on which you don’t have to hold the clip any more! And you don’t have to keep touching the copper strips on the back of the cards when you insert it. Now there are two modules in the box. One side is connected to the…

Polished Paper Nature

I made 3d Space pong with a cardboard, tape, and aluminum foil box controller. The following is the controller. Either side of the controller has a aluminum foil siding to act as the ground. As long as the players are using touching the foil, they can press any of the directional pennies (up, down, left,…

Isaiah Fleischer – Paper Nature Revision

Paper Nature Revision I had two main goals when doing the revison of this project. First, I wanted to make the piece easier to interact with by setting up capacitive mode on the MakeyMakey board. Second, I wanted to add some features to the project, namely an audio component. Unfortunately, I wasn’t able to get…

Jarod Romankiw – Paper Nature (Revision)

For the update, I took the advice to add multiple images to my work of art. When multiple pictures are taken, a different image will appear on the screen. I struggled to figure out the randomizer, however. Sometimes, a number can repeat itself and the same image will stay on the screen. I will ask…

Thai Dao – Paper Nature

For this project, I made an interactive miniature landscape. The project started with a piece of cardboard and lots of newspaper glued together. Afterwards I painted the piece with acrylic paint. it was messy but I enjoyed it. When i decided to paint my house and do a kitchen remodeling, i had to find some…