Models
I modeled a high poly human heart and then decimated it to create both a high and low poly version
Attempting to print models
I 3D printed both models at a small scale. One I printed upright and another on its side. The upright one failed at the top due to being too top heavy and falling over. The one on its side printed successfully but the sides with the supports lost essentially all detail.
Shopping List
- Accelerometer: https://learn.adafruit.com/adafruit-lis3dh-triple-axis-accelerometer-breakout/overview
- White Filament: https://www.amazon.com/OVERTURE-Filament-Consumables-Dimensional-Accuracy/dp/B07PGZNM34/ref=sr_1_2_sspa?keywords=white+filament&qid=1649347668&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUE4TTdMRDhaOFdTRjkmZW5jcnlwdGVkSWQ9QTAwMDExMDcxTjBTSEpYOElDVlYxJmVuY3J5cHRlZEFkSWQ9QTA5MTk0ODMxQ0hVUEFZNEpSNEVYJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
- Microcontroller (ESP8266): https://www.adafruit.com/product/3046
LED options:
- 2x neopixel rings: https://www.adafruit.com/product/1463
- 4x neopixel stick: https://www.adafruit.com/product/2869
- 1x rbg strip: https://www.adafruit.com/product/2964?length=1
(could use my led diodes)