![\"\"](\"http:\/\/www.joshuarosenstock.com\/teaching\/lightart-a18\/wp-content\/uploads\/sites\/7\/2018\/10\/IMG_1560-1-800x533.jpg\")
<\/p>\nIts done! (Although not without a fair share of stress and concern)<\/p>\n
<\/p>\n
After having the piece fully working and cleanly contained, I left it running over night. I woke up to find it not working and I panicked, fearing the worst. I tried everything to get it working again; I replace the jumper wires, the LED strip, and the usb cable. Although the micro controller\u2019s LEDs lit up, the actual NeoPixels showed no signs of turning on. The last thing I could think to try was to re-upload code to the microprocessor. This is when I came to the unfortunate coincidental realizations that our wifi had gone down and that the microprocessor I was using, the Particle Photon Board, simply won\u2019t run without an internet connection. I guess a positive outcome is that my wiring is much cleaner than it originally was and that I have a fresh NeoPixel strip in the mirror. I\u2019m excited to continue working on this project and eventually hang this on my wall.<\/p>\n","protected":false},"excerpt":{"rendered":"
Its done! (Although not without a fair share of stress and concern) After having the piece fully working and cleanly contained, I left it running over night. I woke up to find it not working and I panicked, fearing the worst. I tried everything to get it working again; I replace the jumper wires, the… <\/p>\n