{"id":632,"date":"2018-10-01T11:29:15","date_gmt":"2018-10-01T15:29:15","guid":{"rendered":"http:\/\/www.joshuarosenstock.com\/teaching\/lightart-a18\/?p=632"},"modified":"2018-10-01T11:29:15","modified_gmt":"2018-10-01T15:29:15","slug":"everything-working-jared-grimm","status":"publish","type":"post","link":"https:\/\/www.joshuarosenstock.com\/teaching\/lightart-a18\/jgrimm\/everything-working-jared-grimm\/","title":{"rendered":"Everything Working Jared Grimm"},"content":{"rendered":"

This week I was able to assemble the final piece pretty well, and have decided to hold off on the IoT aspect until maybe this final week.<\/p>\n

I first laser cut the large scale mirror, which came out great. However the mirror is large and thin, which causes it to bend and warp easily, so I also got a piece of lexan poly carbonate as a clear and sturdy backing. The mirror also was thin enough that you could see the bulbs of the LEDs even in the non cut areas. To fix this I used black duct tape and wax paper to diffuse the light more.<\/p>\n

\"\"<\/p>\n

\"\"<\/p>\n

\"\"<\/p>\n

Then I used a staple gun to arrange all my basic LEDs in an array<\/p>\n

\"\"<\/p>\n

 <\/p>\n

I then constructed a frame from wood to hold the mirror and lights, with a inset plat form to keep the mirror as flat as possible.\u00a0\u00a0\u00a0 \u00a0\"\"<\/p>\n

Everything is encased and i hope to this week polish up the overall presentation of it to look clean, be able to be hung on a wall, insure the mirror is clean and that no light leaks from other areas. If i accomplish al lof that early on, i will try and rig up a pannel of the temperature LEDs and then swap them out with the regular ones<\/p>\n

Heres a video in the daylight of it working<\/p>\n