Laser cut plastic mirror, in a geometric volcano shape, with light coming through through cracks.<\/span><\/p>\n The output color of some of the lights in the core of the volcano will adapt based on the temperature. <\/span><\/p>\n Higher temperatures will cause more red and orange as well as have the lights get closer to the top of the volcano.<\/span><\/p>\n The whole main structure will be lit by bright white light<\/span><\/p>\n The center, maybe 2-3 cracks will be colored with a range from blue at the bottom, fading to a soft turquoise\/sea foam green, to white in the middle, then yellows and reds at the top.<\/span><\/p>\n Scale: I would like the volcano to be about three feet tall, however want to keep this piece portable<\/span><\/p>\n I will need to find an adhesive and a glass pane to attach everything to so it stays in place<\/span><\/p>\n I will also use wax paper or a filter \u00a0so you cannot see the bulbs of the leds, but just smooth even light.<\/span><\/p>\n Temperature sensor\/ wifi capabilities<\/span><\/p>\n What if internet connection goes out – static lighting set if connection lost<\/span><\/p>\n <\/p>\n","protected":false},"excerpt":{"rendered":" Overview A clean subtle mosaic piece, with subtle dynamic interaction Laser cut plastic mirror, in a geometric volcano shape, with light coming through through cracks. Technology\/Input The output color of some of the lights in the core of the volcano will adapt based on the temperature. Higher temperatures will cause more red and orange as… <\/p>\n![\"\"](\"http:\/\/www.joshuarosenstock.com\/teaching\/lightart-a18\/wp-content\/uploads\/sites\/7\/2018\/09\/cracked.png\")
![\"\"](\"http:\/\/www.joshuarosenstock.com\/teaching\/lightart-a18\/wp-content\/uploads\/sites\/7\/2018\/09\/volcano-e1536589266389-84x150.png\")
<\/p>\nTechnology\/Input<\/h2>\n
\n
Lighting<\/h2>\n
![\"\"](\"http:\/\/www.joshuarosenstock.com\/teaching\/lightart-a18\/wp-content\/uploads\/sites\/7\/2018\/09\/light.png\")
<\/p>\nOutput\/Goal<\/h2>\n
\n