Here is my finished layers project. For a recap I laser cut a piranha plant from Mario and stacked the pieces on top of each other to give depth. I kept running into issues of when I would cut some pieces they would fall through the grate of the laser cutter. Additionally it was a…
Final Projects – Sebastian Lanz
Here is a shot of all three of my finished projects. They aren’t perfect but in the end I am really happy with them. To reiterate my design concepts: My layers project is mean’t to be a polygonal and abstract sea turtle. I experimented with depth, and simple shapes that still create something distinct and…
First Cuts – Mebi Nosike
This was one of my first cuts I forgot to upload the picture. I cut my AirPods design I had made earlier.
Haley Gilbert: Altered Toys Finished
For my altered toys design I wanted to remake a littlest pet shop, they were my favorite growing up and I always played with the german shepherd one. At the time I had a german shepard so I found it fitting to create a chihuahua as that was the dog I had for the rest…
Layers Project Finished – Mebi Nosike
For my layers project I did a raccoon. I made the layers out of cardboard and glued them together with gorilla glue. I used acrylic paint to paint this because it dries really fast and I like using acrylic paint. I was really happy with how this came out because when I was cutting the…
Haley Gilbert: Final Projects
For my lantern project I wanted to make a topographical map of Plum Island, a place I grew up. I began by tracing all of the different levels above and below seas level and then manipulated them to fit together in procreate before cutting them. Then I cut the layers out of wood and acrylic….
Lantern Project Finished – Mebi Nosike
For my lantern project I used a flicker candle to give the lantern a more realistic look and I cut the pieces out of plywood on the laser cutter. The designs on all sides are the same and are a design of the outline of Africa I found online.
Altered Toy Finished – Mebi Nosike
For my altered toy project I decided to do a toy car. I made the design in Tinkercad and then 3D printed it with PLA in the Makerspace. I decided to use black acrylic paint for the base of the car and gray acrylic paint for the car wheels . This was one of my…
Altered Toys Design – Mebi Nosike
This is my rough sketch of how I wanted my toy car to come out with an altered design of wheels with spikes coming out of them and 2 rockets in the back of the car.