For the layers project, I took a 3D model of my face and made a hunting trophy plaque with it. This was done with Fusion Slicer which I used to get an adequate design that was then imported to Inkscape. I then cut this and the plaque I made into some wood from the makerspace…
Category: Layers Project Finished
Layers Project Finished – Sebastian Lanz
I luckily managed to paint my layers project and finally assemble it and I think it came out great. I happy with the colors I chose and cant wait to find a way to display it.
Layers Project Finished – Deanna Polosino
For my layers project, I did a layered landscape in a camper outline on 1/8th in plywood. My family goes camping a lot so that is where I came up with this idea. I wanted to keep the design not overly complicated but still detailed. I decided to stain the wood with an acrylic paint…
Lauren Waddick – Layers Project Finished
For the layers project, I wanted to cutout a piece that would resemble the monster icons from the Monster Hunter game. I choose Rathalos as it is usually the mascot of the series. I bought wood from the makerspace and colored the piece using acrylic paints I had on hand. I tried to design the…
Katherine Tse Layers Project Finished:
For my layers project, I decided to make an acrylic lotus. As I was working on my design, I realized that I could also cut 5×5 inch squares out around the initial design to get a negative space version of my initial design. I bought transparent green colored acrylic, transparent clear acrylic, and transparent pink…
Kerri Thornton: Layers Project Finished
This piece is roughly 6″ x 4″ ; my work in progress piece was a bit smaller and also the settings were way too high causing most of the detail to be lost, so I decided to redo it. I learned quite a bit from the first full version I made in terms of what…
Samy Rosenberg’s Layers Project Finished
For this project I chose to do my cat Sassy with half her head cut open and showing a skull. I liked the idea of the skull because it reminded me of my cat themed tarot cards. I also liked the idea of the face of subject looking like it was a topographic map coming…
Layers Project Finished: Haley Gilbert
Here is my finished product I chose not to stain the wood after using the stain on another piece I didn’t like the way it looked with the blue stain. For the two little sharks I used a black glass stain and glued them in. For each of the layers depending on the depth of…
Layers Final Calvin
Here it is! The concept of this piece was to create identical layers and utilize transparency and lighting to create a sense of motion and depth. This was my first time working with edge lit acrylic so it was a great opportunity to experiment. The soldering on the bottom of this piece ended up being…
Final Layers Design – Deidra Anderson
Here’s my final layers design product. I tried to add some different picture angles so you can see the negative space in it. I had to lose some pieces since they were too small and/or fell through the laser board. Looks pretty cool in person! Ended up being 4 layers. If I were to do…