I finished creating the toy in SolidWorks and then sent them to pe printed. The octopi for my octopi in a barrel toy printed well however I still need to paint them. I am really happy with how they fit together and are able to create a chain just like the original Monkeys in a…

I have decided to make two more cow shapes, in addition to the original Cowcube. Here is a screenshot of the tinkercad file: We now also have Cowcone and Cowcylinder! And here are them after 3D printing and removing the supports. The supports were annoying to take off, and I definitely didn’t get it perfectly…

So, for this design I was trying to incorporate food into the top part of an attacking Bulbasaur. The way I did this was by creating a base model for Bulbasaur and then found or made food items to place on top of it. In this one I made a blueberry by stacking and editing…

Currently all of the pieces for Lego Russell are printed, however I had to reprint most of the bricks because the top studs didn’t print. Additionally the tolerances are kinda bad which means either the fit of the bricks are too loose or too tight. I also have to finish painting the bricks, which they…

So far I have attempted to make the figure in solidworks! This is what it looks like. I am still very unsure if the connectors will print properly but we will see!

Update I have the pieces printed and am working on assembly! I’m deciding not to paint them because I want them to be as little of a distraction as possible, as they’ll be sitting right in front of my eyes. I got a silicone spatula that I will be cutting up to use for the…

Here is the progress I’ve made on the altered toys project. I decided to sculpt the sea monster Skylander idea for my toy design changing up a bit as I went along. The pose is a little rough and I’m not sure it balance correctly because of it but wanted to see how it would…

Here’s my sliced part! I am making Jangle, a variation of Jenga that is unbalanced. I have a section cut out of the slice to show how the infill will make the pieces unbalanced. Next up is getting everything printed.

This is the version of the PokeCube that I am going to be printing. It is roughly a 3x3x3 inch cube. It is estimated to take 10 hours and 10 minutes, hopefully I will be able to print it before the weekend. I requested to print it in white PLA filament. Should I make several…

For my altered toy, I am making a giant crochet hook accessory for a wii remote. I have started modeling the rough shape in Fusion360, but I have not scaled it to fit the dimensions of a wii remote yet. My question is, should I paint it white like a wii remote or a different…