Ok so since my last post, I’ve done quite a bit of work on this project and I’m just about ready to start actually cutting the acrylic once I can get my hands on enough 1/4 inch to make it all. Additionally, I’ve spent some time in fusion throwing together a quick enclosure for the…
3D Doodle Geometric Reyhan
For this 3D doodle I made a simple knight’s helmet in Blender.
3D Geometric Doodle – Percy
I know this was supposed to be a doodle, but I took it as an excuse to model something I’ve been intending to model for some time now. This is the bracelet the characters wear in the game 9 Hours 9 Persons 9 Doors. My sister requested I 3D print her one for her cosplay…
3D Doodles Geometric
I made this earbud model in SolidWorks while learning how to use the surface tools. I use SolidWorks a lot for school projects, but never use the surface tools to complete them, so it was a good learning experience!
Lantern Project
I have been cutting and messing with my design so far I have this cut. new design
3D doodles geometric
Today I messed around in tinkercad and tried combining shapes. I wanted to see how well the shapes can combine and how they look merged within each other.
3D “Doodle” Geometric -Andrew
Since I work in Solidworks quite often, I used it for my CAD software. I’m planning on using this motor for a project and I needed a model so I make a quick 30 minute CAD for it trying to stay as dimensionally accurate as I could given the description on the website. There were…
3D Doodle Geometric (Nicholas Orciani)
Designed on OnShape
3D Doodles Geometric – Sage Ugras
For my 3D Doodle, I decided to make a super simple remote holder for my apartment. It will grip to my coffee table and my remote should fit loosely in it. I have a bad habit of losing my remote so this should hopefully help with that.
3D Doodle Geometric
I made this as a pedestal on which to place printed characters from Destiny 2, the pedestal label is the type of enemy, its allegiance and its class.
Lantern WIP – Amanda Jones
For my work in progress, I am working on getting to the laser cutter, it has been hard with my schedule. I incorporated the hole for the wire for my lantern and finalized where the cracks are going to be in the lantern.
Lantern Project WIP
I managed to cut and put together my lantern today. Unfortunately, despite testing all my raster settings with a light, most of the detail did not shine through. I also had an issue with holes in the plywood that I had to patch, which made the box look a bit messy. Overall, I think if…
Lantern Design – Ian Cody
A question I have is what I should use to color the wood blue. I want use acrylic paint however I am worried this will fill in some engravings I have on the bottom layer. Should I use dye instead of paint? This is an image of my layers project .svg file to serve as…
WIP – Lantern Project – Samuel Kierstead
I was able to get some time on the laser and begin to cut out some of the pictures for my lantern. I am quite happy with how this is coming together. I ordered the supplies needed for lighting up my lantern. One question that I have is if I should diffuse the light in…
Lantern Project WIP
for this project I attempted to cut my lantern design however I found my wood to be too thick and hard for the laser cutter. this lead to cuts not going all the way through, design features being lost (pentagons becoming circles) and the cut becoming too hot and smoking. I will attempt to redo…
Lantern Project WIP (Nicholas Orciani)
For the design I was going for, 3D modeling and printing seemed to be the best route as opposed to laser cutting. The constraints of 3D modeling software have always led me to adapt my original designs as I try to model them out. This creative adaptation that the software enforces was used as a…
Lantern Design
Quick design I plan to use a multi color bulb to illuminate the box. I also want to put a stand on the top to hold a speaker.
Lantern Project WIP – Ana
So for what I have I was inspired by the Pokemon movie “Mewtwo strikes back” when the Pokemon Mewtwo was being created in his tank with the armor attached with wires all around it. I used LEDs to light both the bottom and top of the tank. I also 3D printed the Mewtwo and plan…
Lantern WIP Reyhan
I finished designing the frame of my Nether Portal lantern, It was difficult to figure out how to create the finger joints for the hollow part and also figure out how to handle kerf. Now that I am done with drawing in Inkscape I will be able to cut the parts on Friday, and assemble…
Lantern Project WIP- Sage Ugras
For my lantern project, I decided to do one of my favorite scenes from Howl’s Moving Castle where Howl is holding the “fallen star”. I thought that this would be a really good scene for a lantern because of the brightness of the star and the darkness of the rest of the scene. I used…
Lantern WIP
Update: I was able to cut and assemble my lantern and love how it turned out. I finished my design and added finger joints to my box. I did not have time to go in and use the laser, but will do so this weekend. I am wondering if I should put colored tissue paper…