I had some issue with the vector lines (that I thankfully believe I now know how to fix, I just didn’t have the tools at my disposal next to the laser) that caused most of the detail to be lost. However, I hope to try cutting this again soon in a larger size to preserve…
Drawings 2&3
For Drawing 2 I decided to use the trace bitmap function to recreate a drawing I’ve made of my own characters back in June. This one might take a long while to engrave due to its complex nature in greyscaling and stuff. For Drawing 3 I used the example script on the canvas page. However…
First Cuts – Sage Ugras
I used 100% speed, 10% power, 100% current, and 1 pass for all vector engraves and I used 25% speed, 25% power, 100% current, and 1 pass for all vector cuts. I also tried to use very little power for my pastor engraves on my Hooty design because I did not want anything to stick…
First Cut(s) – Ana Roure
I printed all of my designs and they came out like this! I love how they all turned out.
Drawings #2 & #3 – Ana Roure
For my third drawing I made pixel art from my favorite arcade game Galaga! I posted the code I made at the bottom of the post.
First Cuts
I ended up cutting my first and second drawings. It went pretty smoothly overall, but for some reason a few of the lines on my drawing #1 piece were engraved slower than others and were engraved deeper as a result. The stem on my leaf pendant was also cut off because I made it too…
Drawings #2 & #3
For drawing 2 I wanted to make a leaf necklace pendant that would use raster engraving to shade the leaf and show the veins. To do this I used the photo trace of a maple leaf and adjusted the shading to my liking. For drawing 3 I messed around with the provided program until I…
Drawing 2 & 3 Pedro Andre Tose
The rest of the Chess sett and a Chess board and some cool program art.
Drawings 2 & 3 – Percy
For drawing 2, I did a more complex drawing of Rosencrantz that uses raster engraving as well. The drawing is fairly simple all things considered and uses only a small amount of engraving, although I do have a second variation that would look better but could potentially take a long time to engrave (which is…
First Cuts
for my first cuts I used my first three drawings with varying success. For my first piece I attempted to print my eagle line drawing. this cut was came out quite well early on with the exception of the belly feathers getting too fragile and falling off in the first prints as well as some…
First Cuts Reyhan
Drawings #1 and 2 cut into plywood
Drawing #2 and #3 – Sage Ugras
For my Drawing #2, I chose to draw Hooty (also known as Hootsifer) from The Owl House. It is a show that I am really interested in and Hooty is my favorite character. He is a house demon who protects the owl house and in multiple episodes, he turns into travel Hooty. I chose to…
Drawings #2 and 3 Reyhan
Drawing #2 is the front and back of a credit card (The numbers have no meaning). The purpose of this is when I get mugged I can give this fake credit card to the robber so I don’t lose any money. B)
Drawing 1
I chose to recreate a manga panel of my favorite character, Bakugou, from my favorite series, My Hero Academia. I made it into a little keychain, so it would have function as well as aesthetic value.
Drawing #1 (Nicholas Orciani)
I have always loved superheroes, specifically the Flash. This design is the Flash’s superhero symbol and reminds me of my hometown friends who used to watch the show about him with me.
Drawing #1
I decided to go with a simplistic but very story-based drawing. Sleep is important for everyone, and anybody will know that your day is so much better when you get a good night’s rest. To be honest I’m someone that has trouble sleeping(insomnia). So, when I do get a good night’s rest, I don’t take…
Introduction: Daniel Pacheco-Cruz
Hello everybody! Sorry for the late post. I’ve been sick for the past week, so I have yet to create a post but, here it is! My name is Daniel Pacheco-Cruz. You can call me Daniel or Danny. I don’t mind either name. My pronouns are he/ his. I am from NJ and am Guatemalan….
Drawing #1 – Jonathan Amirault
I am the youngest of four brothers, and they have always been an incredibly important part of my life. I decided to create this piece by recreating an image from 12 years ago when we were all still living together as actual “kids.” This original image (attached below) was of the 4 of us watching…
Drawing #1 – Amanda Jones
I decided for my first drawing to do a tracing of me and one of my best friends Alyssa. This was on a trip to Cape Cod and we thought it would be cute to take a picture with the Chi Omega symbol (as we are both in Chi O). We have made some of…
Drawing #1 – Sydney
Whoopsie doodle, I am *indecisive* and ended up making 2 drawings for this first assignment. The first one I made is the logo for a YouTube show I watch called Drawtectives. It’s a psuedo-roleplaying/DnD-meets-drawing show, highly recommend. It’s one of my favorite pieces of media at the moment. The second one if my best boi…
Drawing #1 – Harris Brancazio
I chose to draw a concept Formula SAE concept frame. The club is very important to me and is my main passion at WPI, so I want to create art related to it. The wheel will be cut out, and the frame will be engraved.
Drawing #1 – Andrew Roush
For drawing 1 I chose to draw a simplified version of my 3lb combat robot Hat Trick. For when I start laser cutting models I’m thinking of making a 3d layered low poly version to hand on my wall as an ornament. While I started with a 4″x4″ square only slight but is left at…
Drawing #1 – Pedro Andre Tose
I made the knight piece from a chess game. They have a I always enjoy playing chess with anyone. I plan to continue to make other pieces and the board.