Lantern Project For my lantern project, I wanted to make a lantern with a somewhat spherical shape to it. I settled on a dodecahedron because I was fascinated by the geometric pattern. After the initial design, I decided to give it a rustic theme. I picked out a hemp rope wrapped cord and an LED…
Author: Sam
Altered Toys Critique – Samuel Kierstead
I am very happy with this first print! It fully functions as I intended and turns quite smoothly with minimal resistance. I did have to design and print one additional gear (the big one) because I put too much stress on the original Lego one. The 3D printed one is much stronger and holding up…
3D Doodles Organic – Samuel Kierstead
I chose to model a clam. I have done hand carvings of this shape before, so I wanted to make one in Zbrush.
3D Doodles Geometric – Samuel Kierstead
This is a jewelry box that I designed for my niece using SOLIDWORKS. It uses a variety of features and geometry to make the smooth features and accurate heart shape. I also cut extruded her name onto the top.
WIP – Lantern Project – Samuel Kierstead
I was able to get some time on the laser and begin to cut out some of the pictures for my lantern. I am quite happy with how this is coming together. I ordered the supplies needed for lighting up my lantern. One question that I have is if I should diffuse the light in…
Lantern Design – Samuel Kierstead
For my Lantern Project I decided to make a disco ball type shape. The technical term for this shape is a dodecahedron which is made up of 12 pentagon shaped tiles. The design of the cutouts on each pentagon was mostly random, but constrained with lots of geometry based off of the pentagon shape. I…
WIP – Layered Optical Illusion – Samuel Kierstead
I have made a considerable amount of progress and am now ready to start manufacturing parts for my design. I have modeled the belt and sprocket that I need to move the bottom gear. I added 3D printed bearings into my design to eliminate friction at the pivots. I also added the crank to the…
Layers Concept – Samuel Kierstead
I wanted to include motion in this piece. I was inspired by laser cut gears that are layered in an intricate design. Even though it doesn’t look like this one spins it still served as motivation for my work.
Drawing #1 – Samuel Kierstead
I decided to draw the logo for the Formula SAE team here at WPI. This organization means a lot to me so I figured it would be a good first drawing. I put the logo inside of a gear because I am a very mechanically inclined person. The spokes of the gear will be cut…
Samuel Kierstead Introduction and Portfolio
My name is Samuel Kierstead. I am from Plymouth, MA. I am pursuing mechanical engineering and love working with my hands. All my work is tangible and usually requires a steady hand and a bit of patience. I have taken a AR1100 but am looking to expand my computer art skills and explore other mediums….