The original size that I set the cut to be ended up being way too small for the purpose that I had intended. I realized that the scale of my design in Inkscape was off from what I thought, and so when I went to raster the wolf it ended up only being about half an inch long. This meant that as it was being rastered, the wood became very fragile, and so when I cut it out, it broke in half. The rest of the design looks good, but I need to plus up the size on the whole drawing, as well as lowering the power on the part that is being rastered. I was wondering what other changes I could potentially make to enhance the piece beyond simply making it bigger.