Here are my final projects. For the layers project I created a piece depicting two penguins in an icy landscape. Made with layers of painted wood and clear blue acrylic it consists of 4 different depths and a variety of pieces. For the Lantern project I made a Japanese inspired house shaped lamp using designs…
Final Post- Grace
Layers Project: This project was inspired by artists we looked at in class that had the final design only appear when all the layers were alligned ‘just right’. I took a photo of myself in a dance pose, then drew all the flower layers and cut out the silhouette of myself. The end result was…
Final Projects – Emily
Layers Project: The original concept for this piece was the center circle with the 3 raindrop beach scenes at different times of day. The concept then expanded because I didn’t like the final exterior shape of the circle around the raindrops. The concept expanded so that the circle with raindrops was actually a pearl in…
Altered Toys Design- Hannah
For this project I decided to recognize one of my favorite childhood characters- Minnie Mouse! As a child, I was in love and obsessed with everything about Minnie mouse (to the point where I not only dressed up as Minnie for three consecutive halloweens but also wore the costume to daycare for months on end)….
Sydney – Altered Toy Design
Here is my altered toy design! It is a rubik’s cube planter, and I plan to plant one of my little succulents in it! Initially I was just going to do the rubik’s cube planter, but after deciding I wanted some drainage, I designed a little saucer to go underneath and catch the water. I…
sameer: Final Projects May 2021
Layers Project: Original design made with 4 layers of 1/8 inch laser cut birchwood Lantern Project: Custom lantern made with 1/8 inch laser cut birch wood and frosted acrylic front face with RGB fairy lights inside. Altered Toy Project: Singing Charmander 3D printed with PLA designed with TinkerCAD (used Charmander model found online)
Altered Toys Project – Erica
Evil LEGOs 2: Electric Boogaloo 5/5/2021: Printed base: There was a little bit of spaghetti under the overhanging LEGO, but overall turned out good. Real LEGOs do fit on but are a little loose, I think either because the radius of the nubs is a little too small, or I didn’t give them enough normal…
Michelle’s Altered Toys Design
I initially had a lot of trouble coming up with an idea for this project, because I didn’t have any toys growing up, so instead, I decided to take inspiration from a friend’s childhood.
Altered Toys Project
After some challenges with using the full version of ZBrush from the mini version, I have finalized my design! I am creating a spin on my childhood favorite Littlest Pet Shop. I think I am calling my version “Little Scaries”. I plan on adding strange and unusual painting to the finished product. If I have…
Altered Toys Design – Vanshika
For the altered design project, I wanted to 3d print one of those brain teaser puzzles. I used to do a lot of those when I was younger. I tried to use the design of a more simple one, the star because it is essentially the same piece printed 6 times over. It took a…
Sydney – Final Lanterns Project (Finally!)
I have finally finished my lantern project!! I took quite a long time to do one coat of dark stain and three coats of poly, and let them all dry inbetween! I then had to carefully super glue the paper to the inside of the wood pieces. In the end, I decided not to glue…
Sydney – long overdue 3D doodles
This is my tinkercad doodle, I made it an egg holder! I have been super busy the last 2 weeks, so sorry this is so late! This is my very scary looking powdered-wig man. I very much dislike Zbrush, and am excited that my final design is gonna be made completely in tinkercad.
3d Doodles – Vanshika
I used tinkercad to do the 3d doodles. I tried making plankton from spongebob! I clearly need to work on details haha.
Altered Toys Updates
So the game board has been a bit frustrating to work with but the 3D printed pieces came out better than I thought in the test run! The time lapse below unfortunately did not result in a useable piece as one side of the board had holes that did not cut through. I had planned…
Iris: Altered Toy Project
Here is my first 3D print of “Plumpkin the Pumpkin.” As you can see, the trees under the right arm did not work (or print at all apparently), so I will need to redesign and reprint. I wanted the print to be orange but there was no orange in an Ultimaker 3 printer so I…
Lantern Project Updates
I finally have updates for my lantern project! It was a long wait to get back into the laser cutter but I was able to get all of my pieces and some extras cut. It is still a work in progress as there is a lot of gluing, sanding, assembly, lighting and painting left to…
Altered Toys Project – Jakob Sperry
For this project i decided to pivot from my orognal idea because I felt like it did not express my childhood in the way that I want to. Instead i started to think about the diffrent toys that i playes with as I aged and i realized that i pretty quickly pivioted from toys into…
Altered Toy Project | Kat Valery
So far with my project, I’m still working on the 3D modeling portion of the project. However, using original 3D model from the Layers Project, I sent out a test print last night that is in the 3D printer queue I rotated it on a 90 degree angle to lie on it’s back and provided…
Alexander Breiling Altered Toys Project
Still waiting on the print queue, here’s the model I’ll be printing.
Altered Toy Project – Emily
I decided to go with the “Easy” Bake Oven idea for the altered toy project. I put the design I had into the printing queue just to see how some of the things looked but I will be adding some of the suggestions that were made on the design post about adding more things to…
Grace-Altered Toys Finished
Here is my design all printed. I decided to take the feedback to swap and have the book be the screen instead of the keyboard and I really like how it turned out.
Altered Toys Design – Amanda Smith
I love functional pieces, and I think taking my meds is extremely boring to the point where I don’t even want to muster up the energy to open a bottle. I did think about a pez dispenser like Shane, and shoutout to him for posting his stuff because it helped me stop second guessing my…