So the game board has been a bit frustrating to work with but the 3D printed pieces came out better than I thought in the test run! The time lapse below unfortunately did not result in a useable piece as one side of the board had holes that did not cut through. I had planned to use the 1/4 inch plywood in the video below, but after hours of trying to get the remaining holes punched out I decided to just move on. I was glad that I had also made a 1/8 inch cut on my spare black acrylic, and now plan to make another cut on 1/8 inch plywood.

The pieces need a little bit of adjustment before my final print where I make 9 of each design. I chose to use white filament because I plan to paint or add small details to the final pieces.