I ended up printing Minnie mouse and I am so happy with how she came out! She is about 5 inches tall and is the perfect trinket on my desk. I used acrylic paint for the final details.

My first print came out super well, but the “Menu” lettering was too small to really make out. I also broke off one of the trunk window bars trying to remove the supports from the inside of the trunk. The little man came out perfectly, I just removed the supports and filed him down a…

Here is my final Altered Toys Project! I had so much fun learning to use the 3D printer, and I can’t wait to model stuff over the summer and print them next year! In the end, I made the Rubik’s cube planter with drainage holes, and a base to go underneath and catch the drained…

Hello! I was able to reprint my puzzle pieces, and now they fit!

Evil LEGOs 2: Electric Boogaloo 5/5/2021: Printed base: There was a little bit of spaghetti under the overhanging LEGO, but overall turned out good. Real LEGOs do fit on but are a little loose, I think either because the radius of the nubs is a little too small, or I didn’t give them enough normal…

So the game board has been a bit frustrating to work with but the 3D printed pieces came out better than I thought in the test run! The time lapse below unfortunately did not result in a useable piece as one side of the board had holes that did not cut through. I had planned…

Here is my first 3D print of “Plumpkin the Pumpkin.” As you can see, the trees under the right arm did not work (or print at all apparently), so I will need to redesign and reprint. I wanted the print to be orange but there was no orange in an Ultimaker 3 printer so I…

For this project i decided to pivot from my orognal idea because I felt like it did not express my childhood in the way that I want to. Instead i started to think about the diffrent toys that i playes with as I aged and i realized that i pretty quickly pivioted from toys into…

So far with my project, I’m still working on the 3D modeling portion of the project. However, using original 3D model from the Layers Project, I sent out a test print last night that is in the 3D printer queue I rotated it on a 90 degree angle to lie on it’s back and provided…

Still waiting on the print queue, here’s the model I’ll be printing.

I decided to go with the “Easy” Bake Oven idea for the altered toy project. I put the design I had into the printing queue just to see how some of the things looked but I will be adding some of the suggestions that were made on the design post about adding more things to…

Here is my design all printed. I decided to take the feedback to swap and have the book be the screen instead of the keyboard and I really like how it turned out.