This week was the time to focus on making my project look as best as it could. I had decided on designing a sculpture for the LED strip that looks like an audio signal. To make this design I decided to build wooden channels to hold the LEDs. These wooden channels are covered by a light diffuser. For the diffuser I used an old window shade, that is a white canvas material. A picture of one of the channels is shown below.
Once all the channels were constructed, I screwed them onto a thin, long pice of wood in the shape of the signal I wanted. A picture of the final piece and a video of it in action can be seen below. The final documentation will come later, but this video is good for now.